联系方式

杭州三达过滤设备有限公司
地址:浙江桐庐经济技术开发区工业园区三达路87号
电话:0571-64251878 64251868
传真:0571-64251898 

镀前除油过滤机

JHY系列镀前除油过滤机

镀前除油过滤机除了能分离镀前除油清洗溶液中的固体悬浮物外,还能分离悬浮的油粒和吸附乳化分散的油花,以保证进入镀槽的工件表面能完全被溶液所浸润,防止出现局部漏镀或结合不良等质量问题。镀前除油过滤机主要由:自吸泵、过滤筒、除油筒及阀门等组成。使用时除油过滤机的进出液管分别固定于除油清洗槽的长边两侧,使除油过滤机与除油清洗槽构成闭合回路作连续处理,过滤筒通常配杨桃滤芯,如客户要求也可选择绕线滤芯和叠片滤芯,除油筒内装入由特殊材料制成的吸油介质。

These filters besides can separate the solid suspension substances, also can separate the suspension oil particles and absorb the emulsified and dispersed oil showings, thus to ensure that the surface of the parts put in the plating bath can be completely infiltrated and prevent partial plating from leaving out or avoid quality problems of bad connection. The pre-plating degrease filter principally consists of self-priming pump, filter cylinder, degrease cylinder and valves etc. The solution inlet and outlet pipes of the degrease filter should be fixed separately on the internal wall of bath long sides of the degrease bath, thus make the filter and degrease bath into a closed circuit and can work continuously. In general, the carambola cartridge is fitted for the filter cylinder. If the user demands, the wire-wound or laminated cartridge also can be selected. The adsorbed oil agent made of special material is put into the degrease cylinder.

版权所有:杭州三达过滤设备有限公司

友情链接:    盈彩网   一分彩票   四季彩票   手机彩票网   多赢彩票网