联系方式

杭州三 达过滤设备有限公司
地址:浙江桐 庐经济技术开发区工业园区三达路87号
电话:0571-64251878 64251868
传真:0571-64251898 

电镀溶 液活性炭过滤机

 采用双筒(主、副筒)结构,主筒为普通过滤,副筒充 填活性炭吸附有机杂质。关闭副筒进液阀门,可作普通过滤机使用。通过调节主、副筒侧 阀门的开启程度大小,可控制 溶液经活性炭吸附杂质的程度,延长周期处理时间。泵浦配置有普通泵(JHT-P)、磁力泵(JHT-C)或自吸泵(JHT-Z)。通常溶 液流向从活性炭到滤芯。主筒滤 芯采用叠片滤芯,活性炭采用15号颗粒活性炭。过滤机 同时具有排污阀门,方便过滤机的清洗。

A double cylinder structure is adopted for this type of filter, the main cylinder is used for common filter, and the secondary cylinder is filled with activated carbon to adsorb the organic impurities. To close down the solution inlet valve of the secondary cylinder, it can be used as a common filter.Through adjusting the enabling degree of the side valves of the two cylinders, can control the quantity of absorbed impurities in the solution by the activated carbon, and prolong the cyclic procedure. Common pump(JHT-P), magnetic pump(JHT-C) or self-priming pump(JHT-Z) can be allocated. In general, solution flows from activated carbon to the cartridge. The laminated cartridge is used for the main cylinder, the grain degree of activated carbon is No.15.Filter with type JHT-Z also possesses a pollution discharge valve, it is convenient to wash the filter.

版权所有:杭州三 达过滤设备有限公司

友情链接:    汇旺彩票---首页欢迎你   七乐彩票  558赢彩---首页欢迎你   顶峰彩票-首页   博凯彩票---首页欢迎你